8 Signs You Need Ultrasound Probe Repair Services

Ultrasounds use high-frequency sound waves to generate images of the organs and systems inside the body, Medical News Today explains. These are often used for the following:

• Assess a patient’s condition
• Monitor the progress of a treatment
• Check if the treatment worked or not
• Keep an eye on the progress of the disease

As a diagnostic tool, ultrasounds provide doctors with a non-invasive way to take a look at system and organs inside the body, Better Health says. However, if you start to encounter any of the following signs, then that means you’ll need to look for ultrasound probe repair to fix the problem.

Artifacts on the screen

Artifacts are often a result of cables getting run over by the machine. That deals damage to the internal shielding, which causes artifacts to appear on screen. If these starts coming up in the scans, then don’t wait for the problem to get worse. Get it checked as soon as possible.

Damaged cable

Make it a habit to inspect your cables regularly. Look out for any signs of cuts or tears in the outer sheath of the probe. Those cuts may seem small enough to look harmless, but they could damage your ultrasound and lead to probe failure. In addition, damaged cables can also put your patients at risk of electrocution.

Bad lens

Are there any cuts on the machine’s acoustic lens? Those cuts drastically reduce the image quality, all while increasing the danger of patient electrocution. Get that fixed as soon as possible by getting in touch with a trustworthy ultrasound repair service.

Connector problems

It can be a bit challenging to plug the probe into the machine. That’s a common problem and one that can be resolved. Hire a professional repair firm to handle the problem. An experienced repair contractor should get that fixed in no time.

Drops out

Shadow areas that pop up on the screen are called drop out and affect the accuracy of your clinical diagnosis. Don’t take chances with patient care and diagnosis. Get your probe checked by an expert.

Transducer membrane issues

Wear and tear in the ultrasound membrane can mean cracks and holes in the system, which can lead to compromised images. Many of these problems are an inevitable result of regular use. That’s why regular repairs are a must.

Broken locking

This is a common problem in portable ultrasounds. Connectors often take a lot of abuse. A damaged connector—caused by wear and tear over time—will mean that the connector will no longer fit securely, which can lead to fallouts. Your technicians will have a harder time using the device. Prevent these problems by getting your system repaired as soon as your connector shows signs of trouble.

Lines on the screen

Also called dropouts, these lines can lead to a misdiagnosis. Don’t let that happen. Ensure the accuracy of your diagnostic images. Hire a repair technician to look over your ultrasound system is you suspect dropouts. The sooner the problems are addressed, the sooner your machine will get back to working without a hitch.

About This Author

Lara Gill Joined: October 27th, 2018