Keep Your Air-Conditioner Cool With These 4 DIY Steps!
A professional AC doctor checkup can cost you a lot of money, but you can keep that cash in your pocket by doing some simple maintenance of your own at the beginning and the end of the air-conditioning season by following some simple DIY steps. Your air conditioner is designed to keep your home cool during the summer, but like any system, it requires ongoing maintenance to sustain peak operating efficiency.
Most central air conditioners consist of two basic parts namely an outdoor unit (compressor/condenser) that sits next to your home and an indoor unit (evaporator) that are located in a central duct near your furnace. Using for the maintenance steps if your furnace looks different from the one you have had earlier or you have a heat pump, use the owner’s manual to find your way around it. According to Forbes, if you are struggling with a forced-air system that registers throughout the house thereby blowing out air, then you can improve its performance by making sure the filter in the furnace isn't clogged and is in the right direction.
Here Are Some Steps You Must Follow In Order To Keep Your Air-Conditioner Cool:
Change the air filter is the first and foremost step to leading for a better maintained AC. Before turning on your air conditioner for the season, you must look into the filter and inspect it by replacing replace it as needed. Along with various air conditioning in Stuart fl, you can still choose to save your money starting easily with changing the filters. A new air filter will provide cleaner, fresher indoor air in addition to optimizing airflow and general system performance.
Clean the condenser:
Since the condenser is located outside, it can accumulate dirt and debris over time, which can inhibit efficient performance. For maintaining the efficiency and cooling up-to-date, it is good to do some basic cleaning before turning it on for the summer. After shutting off power to the unit, remove the fan cage and use a broom or compressed air source to clean out any leaves, cobwebs, and other debris. This is also a good time to trim or remove any encroaching shrubs or weeds, which will ensure the condenser is able to “breathe.”
Clean the evaporator coil:
As part of your air conditioning system where the refrigerant absorbs heat to produce cold air, the evaporator coil should be cleaned periodically to facilitate this critical function. According to various surveys, Air conditioning is common in the US, with 88% of the maximum population. To access the modern use of the same, it needs regular cleaning, especially with the evaporator coil. You may need to remove a few screws and/or some duct tape, and try the dusting of the coil with a soft-bristled brush, spray it with your commercial coil cleaner. Well, there’s no need to rinse the cleaner off the coil—after initially foaming up, it will simply drain into the condensate drip pan, something your AC doctor will point out when they visit.
Clean the condensate drain:
As an air conditioner runs, the moisture and water vapor are channeled and sometimes get condensed through the condensate drain to a termination point outside the home. This drain can become clogged over time, with algae and sludge buildup, so it is considered as an important step to take as by periodically clearing the line. Locating the drain termination point with the use of a wet/dry vacuum to clean out any latent buildup. Other techniques may also be used such as running a long wire through the line or flushing it with a bleach and water solution.
Article Directory /
Arts, Business, Computers, Finance, Games, Health, Home, Internet, News, Other, Reference, Shopping, Society, Sports