How to clean AC coil? Step by step guideIf you have an AC coil you will find that a good deal of maintenance work will need to be done to ensure that it does not break down. You can hire any professional that you feel is reliable but there are some simple steps that you can take yourself that will help you maintain your AC. The AC coil cleaning in Dubai is a very easy job that should not take too long for you to do.
Must have a good amount of lubricant
When the coil is new and clean and looks clean then the first thing that you should do is get some oil into the coil and make sure that it has a good amount of lubricant. You will find that the coils can come apart from the motor and this is the reason why oil is required. When you get the oil in then the lubricant will also prevent rust and corrosion to happen to the coils.
Remove dust
After this is done then you should remove the plugs out of the coils and then use compressed air to remove any loose dirt that you find inside of the coils. You can find that the wires and terminals can come loose, which can cause them to come off the coil when they are in motion. This is one reason why it is so important that you take care of the AC coil regularly.
Clean with brush
Once the coil is clean you will need to give it a good cleaning using a brush that has been made out of steel wool or similar material. You will need to use this brush regularly to make sure that the dust particles are removed from the coil. You will notice that this brush will have to be cleaned with regular water because when you use the steel wool then the air and water will mix and then this mixture can be released into the coils. This is something that can harm the internal components of the coils.
Check motor
After the AC coil is properly cleaned then you will need to check that the motor is still in good working order. It will require replacing the rubber seals that are found in the motor. These rubber seals are essential as they help to protect the wires and the circuit board and help to avoid any electrical shorts.
You should then replace the brushes that are located in the motor that will allow you to clean the coils thoroughly. You can use this brush daily to get rid of any dust particles from the air. You can use the vacuum cleaner to make sure that there is no air left in the motor at all. If the air is left then you can find that you can damage the internal components of the AC and this can lead to shorting out the AC and also short out the battery.
Lubricate the bearings
When the motor is thoroughly clean then you will need to lubricate the bearings of the motor as this will allow you to reduce noise when the motor is moving. It will take some time to do this but it is worth it. Lubrication can be done by using an auto gel that is available in any auto parts store. This is the best type of lubricant that you can use when you need it for the motor and the rest of the parts of the AC.
Clean it monthly
The AC coils will need to be serviced every three months so you should keep track of this date on a calendar so that you know when the AC needs to be serviced. When you have the date for the servicing, you will need to get the lubrication kit. This will allow you to apply the lubricant and then it will help to prevent any damage that can occur to the coils as a result of improper lubrication.
|
