Guide to Fix Epson Printer Error Code 0XE5

What is Epson Printer Error Code 0xe5?

Epson printers are well-known for their superb functionality and exceptional features. But though these printers are best in terms of performance, they are not free from technical glitches. Epson Printer Error Code 0XE5 is one of the most common errors which the Epson printer users might encounter while trying to print something. Well, if you have already faced this error and want to resolve it, then you are in the perfect place. This article consists of comprehensive guidance using which you will be able to resolve this issue without any hassle.

Reasons that Cause Epson Printer Code 0xe5

Usually, these reasons cause the Epson Error Code 0xe5. If your computer is affected by the malware, it can affect your PC. It could be one of the reasons why the error occurred.

• Another major reason for this error is the failure of the motor driver or CR encoder.
• If your PC is not properly connected to your printer, this problem can easily be caused.
• If you purchased a wireless printer, the printer may not be remembered by the PC and this error will be shown.
• This error may also occur as a result of the printer driver failure.
• If your print head is in bad condition, the problem can be caused by a paper jam. This error can be caused by overloading in the carriage.
• If these reasons do not cause this mistake, the explanation may be an internal issue.
• No client can resolve this internal issue and there is an overwhelming need to call the Epson printer tech support experts.
• Our highly professional engineering specialists are equipped with the expertise to fix the error.

Solutions - Epson Printer Error Code 0xe5

Technique 1:- Cleaning and Reset Epson Printer

Epson Printer Error Message 0xe5 means the failure of the encoder strip. Then you should try to Cleaning and Reset your Epson printer to solve the error.

• First of all, you have needed to remove all of the ink cartridges, and then clean the metal electrical contacts on the back.

• Sales clean the place where they meet up inside the printer, using tips and rubbing alcohol.

• Then dry and then reset the cartridges.

• Now, reset the Epsom Printer.

• Next, unplug power at the wall outlet

• And then wait 5 minutes

• Then press and hold the power “ON” button for 1 minute.

• Now, keep holding, while plugging back in, and for another 1 minute after, then release it.

• Try to printing again, and see the error is fixed. If not, then go to the next step.

Technique 2:- Download Software to Fix this Issue

You should try to execute the PC Fixer software like SmartPCFixer, which is a fully-featured and easy-to-use system optimization suite. With it, you can clean the windows registry, remove cache files, fix errors, defrag disk and clean malicious files on your PC.

Follow these steps to do this task:-

• Open your favorite browser and download the SmartPCFixer program on your PC.

• Click on the “download” button which is located right below to get access to the SmartPCFixer software.

• Next, launch the “Smart PC Fixer” utilities to enable a thorough scan of the PC device.

• By pressing the “Fix All” button, to Resolve Epson Printer Error Message 0xe5 will be repaired together with other incoming threats that were detected earlier.

Technique 3:- Ensure the Paper Jam Problem

The other reason could happen this error means there issue with a paper jam. Then you need to verify that there is not paper jams issue. And make sure that for any foreign object inside the print.

Also, check the belt is well seated.

Thanks for Reading...!

Check Video Solution - Epson Printer Error Code 0XE5

About This Author

Robert john Joined: February 3rd, 2020