The Essential Guide To Ice Rink Liner Installation For 2020

Setting up a backyard ice rink not just works as an excellent family project, but it can also create some wonderful memories that can be cherished forever. Learning how to install and build a backyard ice rink is going to be an affordable when it is built by using some high-quality backyard ice rink liners In addition to that, your backyard’s ice rink with the best liner available in the market will provides for a much safer along with an eco-friendly environment. Let’s learn more about it with the help of this article.  

Backyard Ice Rink Supplies and Equipment

When you are considering different materials and equipment to build the rink, you must always remember that there are multiple ways by which you can build an ice rink in your backyard, that being said, the fundamental concepts more or less remain pretty much the same. To successfully build an ice rink, the concerned surface must be near level. If the surface is not properly leveled, necessary steps must be taken to make uniformly level. Mentioned below is a list of equipment and materials that are required in building and maintaining your backyard ice rink and the rink liner.

Equipment — Sledge hammer, regular hammer, power drill, tape measure, screwdriver, snow shovel and broom.

Material — Screws, string, stakes, nails, boards and a water source.

Tips to Maintain the Backyard Ice Rink

For this, special emphasis has to be given to the maintenance and only doing surface re-smoothing won’t do justice to the surface to fill in any kind of cracks caused by the blade of the ice skate. There may come a situation when you have to shovel snow, get rid of the debris which are populating the backyard ice rink. The most basic equipment required are snow shovels, trowel, hot water source (for re-flooding), and a broom.

Resurfacing — The ice will for sure become chipped and also have additional grooves left by the ice skate blades. To ensure that you are getting a smooth skating surface, re-flooding the rink is a must-have task, by using hot water. It needs to be done during the coldest time of the day and once the ice skating practice is over for all the participants. If you see that the ice rink is developing some unusual bumps, make use of some hot water and melt that particular spot. After that, re-level it by using a metal trowel. Shovel the ice rink surface after a couple of hours of skating.

Disassembling the Backyard Ice Rink

When the temperature is well above the freezing point, it becomes impossible to continue using the ice rink, for such a scenario you need to disassemble ice rink completely. Make openings in the rink in places where the water can be drained out. Once it is fully drained, disassemble the rink in a manner such that the materials can be used again in the next year. Remember that if you leave your backyard ice rink liner for an extended period of time, this can destroy the grass beneath it.

Author: The author is a blogger and the article is about ice rink liner installation. 

About This Author

reezthomas07 Joined: February 5th, 2020