Chainsaw Sharpener: Use the Right One for Sharpening

Whether working with lumbar is your profession or hobby, you know how important it is to have a good chainsaw sharpener. While there could be many options available, finding the best chainsaw sharpener is important to use with your machine. Having a good chainsaw sharpener ensures that working with woods would be easier as there would be no dull blades. In addition, you ensure the longevity of the chain that means good savings in the long run.

There are many people who just throw the chainsaw blade away when its sharpness is compromised. They buy a new blade at a high cost. Actually, it’s a waste of money. Investing in the best chainsaw sharpener can provide great savings in time as well as money. Invest in this simple tool and you won’t have to look out for new chains. There are different kinds of chainsaw sharpeners that provide several advantages. However, you must find the right one for your chainsaw blade.

The right size file

If you are using the round-tooth chain, you must choose a round file that’s appropriate for the pitch of the chain to be sharpened. Using the proper size of file is essential as it allows the filer to achieve the desired sharpness. Actually the filer must adhere to the 80/20 percent rule, which means 80 percent of the file is inside the cutter and the rest 20 percent above the cutter. It creates a sharp, crescent structure at the end of the cutter tooth. If you use a file that is too small in diameter, it will not facilitate sharpening of the top edge of the cutter. In case a file that is too large will remove the hook of the tooth, thus efficient cutting will not happen. Check the right size with an expert to make the best choice.  

Don’t use a dull file

Chainsaw chain is quite hard therefore it requires a sharp file. You must use the sharp file for the process, not the worn out one.

File the cutter as well as the depth gauge

As you go to file the chainsaw, the depth gauge (rakers on the chainsaw) should also be filed. If you only file the cutter teeth and not the depth gauge, it will give only smaller chips with subsequent sharpening.

Using the right technique of filing is also essential. The tools of use such as chainsaw sharpener, folding ruler and others must be bought from a reliable source.  

About This Author

JessicaBeak Joined: September 3rd, 2020