Guide to resolve Canon Printer Error B200

Canon Printer Error B200 suggests that either print head voltage or printhead temperature is not usual. In certain situations, error b200 can either indicate that the print head has been corrupted and may not be used or that there is an issue with the cartridges.

Canon printers are available in 2 cartridges or 4 + cartridges. When you have four or more cartridges on your printer, you will need to take the following procedures.

To Resolve B200 Try this First:-

The dreaded B200 Error on your Canon Printer usually indicates that the print head has died! Before you go trashing the printer or buying a new one try some of the following suggestions.

1. Remove all ink cartridges and reinstall new ones.

2. Remove Print Head and thoroughly clean all of the gold contacts on the print head itself. When reinstalling the print head make sure that the ribbon cable connector is firmly plugged into the print head itself (this usually applies

Method to Troubleshoot - Canon Printer Error Code B200

Method 1 - Reset the Print Head

• Turn ‘Off’ the printer and open it (Look at the picture shown above)
• Turn the ‘print head’ to the larboard side
• Press the power button for more than a 5-time
• Restart the printer
• Give a print command (Look at the picture shown above)

This solution has worked for a lot of users to fix the canon printer mx850 error code b200. It might work for you as well. If not, follow the next.

Method 2 - Restart your System and Canon Printer

• Turn ‘Off’ your printer and your ‘System’
• Turn both of them ‘On’
• Give a print command

If still, the printer says, ‘canon printer mx850 error code b200’, repeat the steps again several times. The error will be fixed. Canon printer users other than mx850 and mg5200 follow the next solution.

Thanks for Reading... if your Printer is not solving check the main blog.

About This Author

Robert john Joined: February 3rd, 2020