Ways To Ensure a Well-Maintained Ice Rink Floor In 2021

One may not be aware of this, but proper maintenance of the ice rink is an important task that must never be ignored. This task takes into consideration numerous jobs or tasks, that not only assures you a top-notch skating pleasure and safety, but also the best (read optimum) efficiency in terms of the energy. For this particular reason, we have talked to some of the leading experts of rink systems of the industry and prepared a list of the most essential tasks to help you with the ice-rink floor maintenance in the best possible way.

Ice Thickness

An ice rink needs to have an ice thickness in between the range of 7 cm and 8 cm. If the ice is less than 7 cm in thickness, there is a possibility of the skaters to cause leaks by skating above the piping. That being said, if the ice exceeds the aforementioned thickness range, the floor will deteriorate in quality, which would further increase your electricity bill. In addition to that, it will also take a much longer time to thaw the ice rink once the operational period ends. You need to acknowledge the fact that more ice gets accumulated; the more energy would be required to keep the ice cold, but also to make it melt. If it is a small-sized ice rink that you are managing or operating, make sure to utilize a snow-plough so that the ice stays thin and also use a fire hose so that another layer of ice can be added, if required. Large-sized skating rink floors automatically make use of this equipment.

Ice Surface

You need to ensure that the topmost layer of the ice always remains smooth and there are zero cracks present. If that is not the case, there is a moderate chance that skaters will lose control and fall. A sufficient amount of scrapped ice can be applied on top of the ice layer to significantly reduce energy costs. This can also recue the speed of the skaters and thus bring down the risk of falls and accidents.

Ice Maintenance

Sweeping for about 3 times during the day is recommended for best results. If the ambient temperature is low, you need to be extra careful while spraying the ice. The water will not just freeze from beneath the surface, but the same will also take place from above. This can cause irregularities in the ice surface. For such situations, experts recommend spraying a fine mist. If it starts to rain and you ice rink has clean and smooth edge, you don’t have to worry about that as the rainwater would run off the surface.

Consider this article and make use of the best quality ice rinks in the market.

Author: The author is a blogger and the article is about ice rink maintenance.

About This Author

reezthomas07 Joined: February 5th, 2020