5 Tips to Create a Safe and Effective Large LED Light Installation

Due to safety concerns and the nature of LED light fixture design, LED bars, LED strip lights, and module light string have some limitations for the length of the run. But you can make a safe and effective large LED installing by considering some important things in your mind.

By installing LED lights on your property, you can reduce your carbon footprint and also enjoy more control. It is ideal to find a professional for LED lights installation in Round Rock, or wherever you live, for a safe installation. Below, I’m going to share some tips you should consider for creating a safe large LED light installation.

1.  Observe Run Limits for Your LED Fixture

A run is generally defined as a section of LED strip light that runs continuously from a single power source. Observing run limits will result in safer installation. It also helps to prolong the life of the lights.

2.  Don’t Overdrive a Low-Voltage Power Source

Powering more than an adapter is rated for will source the adapter to overheat that can cause a fire. So, you should only use 80% of a power supply’s capacity that will help you protect against power surges.

3.  Use the Right Amount of Power and the Right Gauge Wires for Avoiding Voltage Drop

Wire gauges specify the thickness of a wire. And a higher number is lower and the lower number is higher. The wire gauge of 12V power wires and parallel run wires is also an important factor that you should consider in a large installation. If lighting is at some distance from its power source, then a voltage drop occurs. Voltage drop is the steady withdrawing of voltage beside the length of the wire as electrical energy travels away from the power source. It actually happens when a light or appliance is placed far from the electric source.

It can be avoided by using a voltage drop calculator that helps in actually finding the right wire gauge based on the number of fixtures in an installation, how they are spaced, and the detachment between the electricity source and the lighting fixtures.

4.  Supply Sufficient Power

One of the most effective ways to get power to a secluded fixture is to use a power supply with an advanced wattage than necessary. By supplying more power from the source, the more fixtures will be reached after traveling through the wires. To get optimum performance, you should avoid loading a driver more than its full capacity.

5.  Get Creative

There are various safe and efficient ways that you can use to install LED lights on a large installation. You can install a lighting fixture just by placing power supplies and using additional wiring. By following the same layout ideas, you can install a LED strip lighting, LED light bar, and also other LED fixtures.

About This Author

Gregory Armstrong Joined: July 7th, 2020